性質：
本品為微黃色透明液體，可用客戶指定的溶劑稀釋。不溶于水，溶于多數有機溶劑，閃點：12.5℃ (閉皿)，18℃（開皿），沸點：109℃，凝固點：-40℃。粘度（20℃）：0.9mPa.s 。

用途:

1.用作乙烯基、雙烯基單體的聚合引發劑，推薦的交聯溫度范圍為180-240 ℃。在菅式法和釜式法高壓聚乙烯聚合工藝中，它是一種常用的引發劑，交聯的溫度范圍為240-280 ℃。

2、為不飽和聚酯的高溫固化劑。

3、是二烯類橡膠的有硫化劑，適合于厚橡膠制品硫化。拉伸強度，伸長率和耐壓縮和變形性能好，獲FDA批準，適合于絕大多數橡膠、聚氨酯彈性體、硅橡膠的硫化，可獲得白色和各種鮮艷色彩的橡膠制品。

4、用于聚丙烯高速紡絲（丙綸）工業中，做分子量調節劑（用于降溫母粒生產中）。具有分子量分布窄，熔體指數高，紡絲均勻的特點，是聚丙烯修飾中使用的優良降解劑，在聚丙烯中加入該品，可制成控制流變聚丙烯，提高流動性，使聚丙烯快速模壓成為可能，同時可減少模壓產生的形變。經過改性的聚丙烯可制成薄膜料。

5、用于油品添加劑和變壓器油的降凝劑。

包裝及運輸:

我廠的標準包裝為20公斤的聚乙烯包裝。也可根據客戶的要求的包裝尺寸供貨，客戶可在訂貨時提出要求。

Property：
This product is a slightly yellow transparent liquid, which can be diluted with the solvent specified by the customer. Insoluble in water, soluble in most organic solvents, flash point: 12.5 ℃ (closed dish), 18 ℃ (open dish), boiling point: 109 ℃, freezing point: -40 ℃. Viscosity (20 ℃): 0.9mPa. s.

Purpose:

1. As a polymerization initiator for vinyl and dienyl monomers, the recommended crosslinking temperature range is 180-240 ℃. It is a commonly used initiator in high-pressure polyethylene polymerization processes using the Kan method and the kettle method, with a crosslinking temperature range of 240-280 ℃.

2. It is a high-temperature curing agent for unsaturated polyester.

3. It is a vulcanizing agent for diene rubber, suitable for vulcanizing thick rubber products. Good tensile strength, elongation, compression and permanent deformation resistance, approved by FDA, suitable for vulcanization of the vast majority of rubber, polyurethane elastomers, and silicone rubber. It can obtain white and various bright colored rubber products.

4. Used in the high-speed spinning of polypropylene (polypropylene fiber) industry as a molecular weight regulator (used in the production of cooling masterbatch). It has the characteristics of narrow molecular weight distribution, high melt index, and uniform spinning, and is an excellent degradation agent used in polypropylene modification. By adding this product to polypropylene, it can be made into controlled rheological polypropylene, improve flowability, and make rapid molding of polypropylene possible, while reducing deformation caused by molding. Modified polypropylene can be made into thin film materials.

5. Used as oil additive and pour point depressant of transformer oil.

Packaging and transportation：

Our factory's standard packaging is 20 kilograms of polyethylene packaging. We can also supply according to the packaging size requested by the customer, and the customer can make requirements when placing an order.