商品名稱：TMHP

中文名稱：二(3,5,5-三甲基己酰)過氧化物

化學名稱：二(3,5,5-三甲基己酰)過氧化物

分子式：C18H34O4

分子量：314.5

理論活性氧含量：5.09%

CAS：3851-87-4

主要分解產物：CO2，2,2,4,7,9,9-六甲基癸烷，2,4,4-三甲基戊烷 。

指標：

半衰期（氯  苯溶液中測得）：

0.1小時：96℃

1小時：77℃ 

10小時：59℃ 

熱穩定性數據：

自加速分解溫度（SADT）：20℃

危急溫度（Tem）：10℃ 

控制溫度（Tc）：0℃

貯存溫度（Tsmax）：-10/0 ℃

技術標準：

外觀：清亮液體

純度：74-76%

色度：20 Pt-Co max

無機和有機可水解氯：250mg/kg max       

包裝：

標準包裝是凈重20公斤的聚乙烯塑料桶。也可按用戶的要求的規格包裝。

本品為D類液體有機過氧化物，貨物分類：5.2，聯合國編號：3115，控溫運輸，二類危險貨物包裝.。鐵路和空運被禁止。

注意事項：

(1) 遠離火種、明火和熱源。

(2) 避免接觸還原劑（如胺類）、酸、堿和重金屬化合物（如促進劑、金屬皂等）

(3) 請參照本產品的安  全數據表（MSDS）。

用途：

1．乙烯聚合引發劑

TMHP是一種常用的LDPE管式法或釜式法聚合引發劑，為了獲取更廣的聚合溫度范圍，常常和其它引發劑配合使用，聚合溫度為150-190℃。

2．氯乙烯聚合引發劑

TMHP也是水相懸浮法氯乙烯聚合的引發劑，引發溫度為50-70℃。 

貯存條件：

保持包裝密閉并處于良好通風狀態下，max貯存溫度為0℃，避免和還原劑如胺類、酸、堿、重金屬化合物（促進劑及金屬皂），嚴禁在庫房?jī)?nèi)分裝及取用。

貯存穩定性：

按廠家提示的條件進行保存，產品在三個月內可保證出廠技術標準。

滅火：

小的火災需用干粉或二氧化碳滅火器滅火，同時用大量水噴灑，防止再燃。大火需在安全距離之外用大量水噴射。

Product name: TMHP

English name:Bis(3,5,5-trimethylhexanoyl) peroxide

Chemical name: bis (3,5,5-trimethylhexyl) peroxide

Molecular formula: C18H34O4

Molecular weight: 314.5

Theoretical active oxygen content: 5.09%

Main decomposition products: CO2, 2,2,4,7,9,9-hexamethyldecane, 2,4,4-trimethylpentane.

Safety indicators:

Half life (measured in chlorobenzene solution):

0.1 hour: 96 ℃

1 hour: 77 ℃

10 hours: 59 ℃

Thermal stability data:

Self accelerating decomposition temperature (SADT): 20 ℃

Emergency temperature (Tem): 10 ℃

Control temperature (Tc): 0 ℃

Storage temperature (Tsmax): -10/0 ℃

Technical standards:

Appearance: Clear liquid

Purity: 74-76%

Chromaticity:20 Pt-Co max

Inorganic and organic hydrolyzable chlorine: 250mg/kg max

packing:

The standard packaging is a polyethylene plastic bucket with a net weight of 20 kilograms. It can also be packaged according to the specifications requested by the user.

This product is a Class D liquid organic peroxide, cargo classification: 5.2, UN number: 3115, temperature controlled transportation, packaging for Class II dangerous goods. Railways and air transportation are prohibited.

Safety precautions:

(1) Keep away from sparks, open flames, and heat sources.

(2) Avoid contact with reducing agents (such as amines), acids, bases, and heavy metal compounds (such as accelerators, metal soaps, etc.)

(3) Please refer to the Safety Data Sheet (MSDS) of this product.

Purpose:

1. Ethylene polymerization initiator

TMHP is the most commonly used LDPE tubular or kettle polymerization initiator. In order to obtain a wider polymerization temperature range, it is often used in conjunction with other initiators, with a polymerization temperature of 150-190 ℃.

2. Vinyl chloride polymerization initiator

TMHP is also an initiator for the aqueous suspension polymerization of vinyl chloride, with an initiation temperature of 50-70 ℃.

Storage conditions:

Keep the packaging sealed and in a well ventilated state, with a maximum storage temperature of 0 ℃. Avoid mixing with reducing agents such as amines, acids, alkalis, and heavy metal compounds (accelerators and metal soaps). It is strictly prohibited to pack or use in the warehouse.

Storage stability:

Store according to the manufacturer's instructions, and the product can meet the factory technical standards within three months.

Fire extinguishing:

Small fires need to be extinguished with dry powder or carbon dioxide fire extinguishers, and a large amount of water should be sprayed to prevent reignition. A large fire requires spraying a large amount of water from a safe distance.