商品名稱：DEHPH

中文名稱：2,5-二甲基-2,5-二（2-乙基己酰過氧化）己烷

化學名稱：2,5-二甲基-2,5-二（2-乙基己酰過氧化）己烷

分子式：C24H46O6

分子量： 430.6

純過氧化物活性氧含量：7.43%

實際產品活性氧含量：6.84% min.

CAS號：13052-09-0

EINECS/ELINCS No：235-935-5

指標Safety indicators:

半衰期:

0.1小時：105℃

1小時：86℃

10小時：68℃

熱穩定性數據:

自加速分解溫度（SADT）：35℃

危急溫度（Tem）：25℃ 

控制溫度（Tc）：20℃

貯存溫度（Tsmax）：-20/15 ℃ 

技術標準:

規格外觀: 澄清液體

色度: 20 Pt-Co max. 

含量: 92.0% min. 

氫基過氧化物以 2,5-二氫基過氧化-2,5-二甲基己烷計） ：2.2% max.

無機及有機可水解氯: 100 mg/kg max.

密度 20°C: 0.956 g/cm3  

粘度20°C: 80 mPa.s  

用途：乙烯、苯乙烯、丁二烯、丙烯酸酯和甲基丙烯酸酯聚合和共聚合用引發劑。

包裝及運輸:

標準包裝為20公斤的聚乙烯包裝。也可根據客戶的要求的包裝尺寸供貨，客戶可在訂貨時提出要求。

儲存注意事項:

1.儲存于陰涼通風的空間內,倉溫不超過15℃。

2. 遠離火種，熱源。應與酸類，還原劑，易燃物，可燃物，還原劑等分開存放。

3. 儲存間的照明通風等設施采用防爆型，開關設在戶外。

4. 搬運時應小心輕放，防止包裝及容器的破損，禁止撞擊和振蕩，分裝和搬運作業要注意個人防護。

5. 請客戶在貯運和使用本產品時仔細閱讀《技術說明書（MSDS）》。

產品有效期:

在嚴格按照生產廠家提示的條件貯存、運輸。三個月內產品質量可確實保證。

火災防護:

1、本產品可能因受熱而劇烈分解，會猛烈起火，少量產品小火應迅速用泡沫或干粉滅火器進行滅火。

2、大火應迅速撤達到不危險的距離以外并用水槍樸救，通知消防部門處理。

Product name：DEHPH

English name:2,5-Dimethyl-2,5-di(2-ethyl hexanoylperoxy)hexane

Chemical name: 2,5-dimethyl-2,5-di (2-ethylhexyl peroxide) hexane

Molecular formula：C24H46O6

Molecular weight： 430.6

Pure peroxide active oxygen content：7.43%

Actual active oxygen content of the product：6.84% min.

CAS.：13052-09-0

EINECS/ELINCS No：235-935-5

Safety indicators:

 Half life (measured in chlorobenzene solution):

 0.1 hour: 105 ℃

1 hour: 86 ℃

10 hours: 68 ℃

Thermal stability data:

Self accelerating decomposition temperature (SADT): 35 ℃

Emergency temperature (Tem): 25 ℃

Control temperature (Tc): 20 ℃

Storage temperature (Tsmax): -20/15 ℃

Technical standards:

Specification and appearance: clarified liquid

Chromaticity: 20 Pt-Co max. 

Content: 92.0% min. 

Hydrogen peroxide (calculated as 2,5-dihydroperoxide-2,5-dimethylhexane): 2.2% max

Inorganic and organic hydrolyzable chlorine: 100 mg/kg max

Density 20°C: 0.956 g/cm3  

Viscosity 20°C: 80 mPa.s  

Usage: initiator for polymerization and copolymerization of ethylene, styrene, butadiene, acrylate and methacrylate.

Packaging and transportation:

The standard packaging is 20 kilograms of polyethylene packaging. We can also supply according to the packaging size requested by the customer, and the customer can make requirements when placing an order.

Storage precautions:

1. Store in a cool and ventilated space, with a warehouse temperature not exceeding 15 ℃.

2. Keep away from sparks and heat sources. It should be stored separately from acids, reducing agents, inflammables, combustibles, reducing agents, etc.

3. The lighting and ventilation facilities in the storage room are explosion-proof, with switches located outdoors.

4. When handling, care should be taken to prevent damage to packaging and containers, and impact and oscillation are prohibited. Personal protection should be taken during packaging and handling operations.

5. Please carefully read the Safety Technical Manual (MSDS) when storing, transporting, and using this product.

Product validity period:

Store and transport in strict accordance with the manufacturer's instructions. The product quality can be guaranteed within three months.

Fire protection:

1. This product may decompose violently due to heating, and may ignite violently. A small amount of small fires should be put out quickly with foam or dry powder extinguishers.

2. The fire should be quickly evacuated to a safe distance and rescued with a water gun, and the fire department should be notified for handling.