商品名稱：CH

中文名稱：1,1-二叔丁基過氧化環己烷

化學名稱：1,1-二叔丁基過氧化環己烷

分子式：C14H28O4

分子量： 260.4

理論活性氧含量：12.29%

CAS號：3006-86-8

UN No. 3105

Einecs :  221-111-2

性 狀:  微黃色透明液體,不溶于水，溶解于大部分有機溶劑。

指標:

半衰期:

0.1小時：134℃

1小時：113℃

10小時：94℃

熱穩定性數據:

自加速分解溫度（SADT）：70℃

危急溫度 (Tem)：65℃

控制溫度 (Tc)：--

貯存溫度 (Tsmax)：--/25℃

技術指標:

外觀 : 微黃色透明液體

濃度 ：50、酸、堿和重金屬化合物（如促進劑、金屬皂等）

請參照本產品的數據表（MSDS）。

用途:

(1) 氯乙烯的聚合引發劑：

BCHPC是一種新型氯乙烯的水相懸浮聚合引發劑，它和CUPN（過氧化新癸酸異丙苯酯），LPO（過氧化二月桂酰），等復配使用，可提高反應活性，聚合溫度為40-65℃。

(2) 熱固樹脂的固化：

BCHPC可用于不飽和聚酯的固化，是一種不飽和聚酯制品所選的固化劑，適用溫度范圍寬，具有十分優良的固化特性，也可和TBPB及CH335復配使用。

貯存條件:

保持包裝密閉并處于良好通風狀態下，貯存溫度≤25℃，避免和還原劑如胺類、酸、堿、重金屬化合物（促進劑及金屬皂），嚴禁在庫房內分裝及取用。

貯存穩定性:

按廠家提示的條件進行保存，產品在三個月內可保證出廠技術標準。

滅火:

小的火災需用干粉或二氧化碳滅火器滅火，同時用大量水噴灑，防止再燃。大火需在不危險的距離之外用大量水噴射。

Product name：CH

English name：1,1-bis（tert-buty peroxy）cyclohexane

Chemical name: 1,1-ditert-butylperoxycyclohexane

Molecular formula：C14H28O4

Molecular weight： 260.4

Theoretical active oxygen content：12.29%

CAS. : 3006-86-8

UN No. 3105

Einecs :  221-111-2

Character: Colorless or slightly yellow transparent liquid, insoluble in water, soluble in most organic solvents.

Safety indicators:

Half life:

0.1 hour: 134 ℃

1 hour: 113 ℃

10 hours: 94 ℃

Thermal stability data:

SADT：70℃

Self accelerating decomposition temperature (SADT): 70 ℃

Emergency temperature (Tem)：65℃

Control temperature (Tc)：--

Storage temperature (Tsmax)：--/25℃

Technical indicators:

Appearance: Colorless or slightly yellow transparent liquid

Concentration: 50, acid, alkali, and heavy metal compounds (such as accelerators, metal soaps, etc.)

Please refer to the Safety Data Sheet (MSDS) of this product.

Purpose:

(1) Polymerization initiator of vinyl chloride:

BCHPC is a new initiator for aqueous suspension polymerization of vinyl chloride. It can be used in combination with CUPN (cumyl peroxide neodecanoate), LPO (lauroyl peroxide), etc. to improve the reaction activity. The polymerization temperature is 40-65 ℃.

(2) Curing of thermosetting resins:

BCHPC can be used for the curing of unsaturated polyester and is the preferred curing agent for high-end unsaturated polyester products. It has a wide temperature range and excellent curing properties. It can also be used in combination with TBPB and CH335.

Storage conditions:

Keep the packaging sealed and in a well ventilated state, with a maximum storage temperature of 25 ℃. Avoid mixing with reducing agents such as amines, acids, alkalis, and heavy metal compounds (accelerators and metal soaps). It is strictly prohibited to pack or use in the warehouse.

Storage stability:

Store according to the manufacturer's instructions, and the product can meet the factory technical standards within three months.

Fire extinguishing:

Small fires need to be extinguished with dry powder or carbon dioxide fire extinguishers, and a large amount of water should be sprayed to prevent reignition. A large fire requires spraying a large amount of water from a safe distance.